HP Integrity rx2620 User's & Service Manual page 139

ver -- Displays version info
Type "help" followed by command name for full documentation on that
command.
Type "help -a" to display a list of all commands.
Example 4 help cpuconfig Command
Shell> help cpuconfig
Deconfigure or reconfigure cpus
CPUCONFIG [module] | [threads] [on|off]
module : Specifies which cpu module to configure
threads : Use to display info or configure threads
on|off : Specifies to configure or deconfigure a cpu module or threads
Note:
1. Cpu status will not change until next boot.
2. Specifying a cpu number without a state will display
configuration status.
Examples:
* To deconfigure CPU 0
fs0:\> cpuconfig 0 off
Cpu will be deconfigured on the next boot.
* To display configuration status of cpus
fs0:\> cpuconfig
PROCESSOR MODULE INFORMATION
# of
CPU Logical
Module CPUs
------ -------
------------
0 2
Active
1 2
Active
* To display cpu thread status
fs0:\> cpuconfig threads
cpuconfig: Threads are turned off.
* To enable cpu threads
fs0:\> cpuconfig threads on
cpuconfig: Threads will be on after a reset
* To disable cpu threads
fs0:\> cpuconfig threads off
cpuconfig: Threads will be off after a reset
Example 5 help ioconfig Command
Shell> help ioconfig
Deconfigure or reconfigure IO components or settings
IOCONFIG [fast_init|wol [on|off]]
L3
Cache Cache
Speed Size
-------- ------
1.1 GHz 4MB
1.1 GHz 4MB
L4 Family/
Model
Size (hex.) Rev
------ ------- ---
32MB 1F/01
32MB 1F/01
Processor
State
B1
B1
139