Replacing A Processor - HP Integrity rx2620 User's & Service Manual

Figure 44 Unlocking the Processor Module Locking Mechanism
9. Lift the processor up and out of the chassis. Place the processor module into an
anti-static container.

Replacing a Processor

CAUTION: Do not modify the settings of the DIP switches located on the system
board. These switches are for factory use. Failure to observe this caution will result
in server failure.
1. Power off the server and disconnect all cables. See
(page 27).
2. Remove the top metal cover. See
(page 33).
3. If you are replacing a processor module, remove the old processor as described
in "Removing a Processor" (page
4. Verify the ZIF socket lock is unlocked. The thicker post on the locking mechanism
must be pointed toward the unlock symbol on the ZIF socket.
the socket unlocked.
"Powering Off the Server"
"Removing and Replacing the Top Metal Cover"
52).
Figure 47 shows
54