Lan Leds; Rear Panel Lan Leds; Lan A Connector Leds; Lan B Connector Leds - HP Integrity rx1620 Operation Manual

Troubleshooting

LAN LEDs

LAN LEDs
The front panel LAN LED indicates the system is communicating over the Gigabit or system management
LAN:
• Blinking green, the system is communicating over the LAN.
• Solid green, LAN link is established, no current LAN activity.

Rear Panel LAN LEDs

There are three LAN connectors on the rear panel. They are:
• 1Gb LAN A connector
• 1Gb LAN B connector
• Optional MP 10/100Mb LAN C connector

LAN A Connector LEDs

The 1Gb LAN A interface provides four LEDs on the rear panel:
Table 5-22 1Gb LAN A Connector LEDs
LAN LED Location
Not used Top
1000mb 2nd from top
100mb 2nd from bottom
Activity Bottom

LAN B Connector LEDs

The 1Gb LAN B interface provides two LEDs on the rear panel (the left LED is not used):
Table 5-23 1Gb LAN B Connector LEDs
Link LED
Activity
Link w/no activity
No link
98
Color
None
Amber
Green
Green
Output
Blinking Orange
Solid Orange
Off
None
Blinking amber – the 1000 Mbps with ethernet protocol and
twisted-pair wiring is enabled.
Off – no link.
Blinking green – the 100 Mbps with ethernet protocol and
twisted-pair wiring is enabled.
Off – no link.
Blinking green – The Activity LED lights, and all other
LEDs are off for a 10 Mbps connection.
Off – no activity
State
Chapter 5