9
Configuring and Monitoring SNMP
This chapter provides information about how to configure the Simple Network Management
Protocol (SNMP) and how to use SNMP to manage the Nokia IP40 Security Platform.
This chapter covers the following topics:
SNMP Description
SNMP Configuration from Nokia IP40 Security Platform
Setting Up SNMP Access to Nokia IP40 Security Platform
Configuring the SNMP Parameters
Configuring SNMP Parameters from the Command-Line Interface
SNMP Description
SNMP is the industry standard for monitoring and managing devices on data communication
and telecommunication devices or systems. SNMP helps in centrally monitoring and diagnosing
such devices.
Nokia IP40 Security Platform supports the following MIBs:
MIB-II (for more information, see RFC 1213)
Host Resource MIB (for more information, see RFC 1514)
SNMP Configuration from Nokia IP40 Security Platform
You can use the Nokia IP40 GUI portal and the command-line interface (CLI) to set, change,
and view parameters for SNMP.
Setting Up SNMP Access to Nokia IP40
Allow or disallow SNMP manager software running outside your network to monitor the Nokia
IP40 Security Platform.
Nokia IP40 Security Platform User's Guide v1.1
Security Platform
119