Site-To-Site Vpn With Windows 2000 - Nokia IP40 User Manual

14
Working with VPNs
To configure IP40 Satellite X for VPN connection with SmartCenter NG AI using
Certificates.
1. Click Services on the main menu, and choose Connect.
The Subscription Services Wizard appears.
2. Enter the IP address of the Check Point NG AI Management station.
The Connecting window appears.
3. Enter the Gateway ID and Registration Key that is used while creating the IP40 dynamic
object on the LSM.
4. The Connecting window appears.
After the connection is complete, the list of Services downloaded window appears.
5. Click Finish.
6. Click VPN on the main menu and click VPN Certificate tab
7. Click the VPN Sites tab and click New Site.
8. Specify the IP address of the Check Point NG AI management station and check the
Unrestricted.
9. Click Next
10. Select Specify Configuration.
11. Enter the Destination network and the subnet mask
12. Click Next
13. Click Use Certificate.
14. Click Next.
15. Click Finish.
Note
In order to download the certificate from Check Point NG AI and create a VPN site manually
on the Nokia IP40 use the VPN-1 Edge/Embedded gateway on the Smart Dashboard and
create a Star VPN community

Site-to-Site VPN with Windows 2000

You can configure for VPN connectivity between the Nokia IP40 Satellite X and a Microsoft
Windows 2000/XP IPSec for site-to-site VPN.
Authentication supported: preshared secret
The following scenarios are supported:
Windows Gateway to Nokia IP40 Satellite X in Unrestricted mode—in this mode, traffic is
encrypted between the gateways' subnets (network A to network B).
194 Nokia IP40 Security Platform User's Guide v1.1