Using Static Routes - Nokia IP40 User Manual

To delete static NAT mapping
To delete a static NAT mapping, do the following:
1. In the desired static NAT mapping row, click the Erase tab.
A confirmation message appears.
2. Click Ok.
The mapping is deleted.

Using Static Routes

Note
You usually do not need to specify static routes. Only define static routes if it is required.
A static route is a setting that explicitly specifies the route for packets destined for a certain
subnet. Packets with a destination that does not match any defined static route is routed to the
default gateway.
The Static Routes page lists all existing routes, including the default, and indicates whether each
route is currently connected, or reachable, or not reachable.
To add a static route
1. Click Network in the main menu, and click the Static Routes tab.
The Static Routes page appears, with a listing of existing static routes.
Nokia IP40 Security Platform User's Guide v1.1
Using Static Routes
91