Generating A Self-Signed Certificate And Private Key - Nokia IP40 User Manual

Note
The URL https://my.firewall is accessible from the Internal network by default.
To enable HTTPS Web access
1. In the main menu, click Setup.
The Setup page appears.
2. Click the Management tab.
The Management page appears.
3. In the HTTPS menu, click :
4. Click Apply when you are finished making the settings.
The Saved Successfully message appears.

Generating a Self-Signed Certificate and Private Key

Use the following command to generate a certificate and its associated private key. To better
ensure your security, generate the certificate and private key over a trusted connection.
Nokia IP40 Security Platform User's Guide v1.1
Internal Network— to enable only users of your internal network to access your IP40
through HTTPS.
Internal Network + VPN— to enable users of your internal network and users
connected to your IP40 through a VPN tunnel to access your IP40 through HTTPS.
IP Address Range—to give a range of IP addresses. Traffic from these IP addresses only
can access your IP40 through HTTPS.
ANY— to enable traffic generated from any IP address to access your IP40 through
HTTPS.
117