Direct Dial-Up Ppp - Nokia IP40 User Manual

1. Enter the following information:
a. Your username and password, and confirm the password.
b. The service name as given by your service provider.
c. The IP address of the PPTP server as given by your service provider.
d. The IP address of the PPTP client as given by your service provider.
e. Select the PPTP client subnet as given by your service provider.
You can configure the MTU size. Nokia recommends that you leave this field empty.
Consult your service provider to modify the default MTU.
2. If you are not using automatic configuration of DNS servers, do the following:
a. Clear the Obtain DNS servers automatically check box.
The Internet page with DNS server options appears.
b. Enter the Preferred (primary) DNS server IP address.
c. Enter the Alternate (secondary) DNS server IP address.
3. Click Apply.

Direct Dial-Up PPP

You can connect the Nokia IP40 Security Platform to the Internet by using a dial-up connection.
The device can establish a PPP connection to an ISP by using an external modem connected to
an auxiliary port. The modem can be an analog modem or an ISDN terminal adapter.
You can use the following modems:
Analog modem 56 Kbps (DTE speed: up to 115200)
ISDN TA (using PPP) 64 Kbps (DTE speed: up to 230400)
ISDN TA (using MLPPP) 128 Kbps (DTE speed : up to 460800)
Nokia IP40 Security Platform User's Guide v1.1
Direct Dial-Up PPP
77