Installing Vpn Certificates By Using Cli; Installing Vpn Certificates From Smartcenter - Nokia IP40 User Manual

The name of the CA that issues the certificate, and the name of the gateway to which this
certificate was issued, appear.

Installing VPN Certificates by Using CLI

You can download and install the VPN certificate by using the command line interface.
Use the following command to install the certificate on the device:
set vpn certificate <file name>

Installing VPN Certificates from SmartCenter

VPN certificates are used to authenticate a VPN connection established between Check Point
SmartCenter NG AI that uses Check Point Large Scale Manager and the dynamically configured
IP40 security platform that uses the DAIP.
The certificate created on the Check Point NG AI can be uploaded to the IP40 Satellite.
To upload VPN certificates and to create a dynamic VPN site by using Check
Point Smart LSM
1. Click Services on the main menu, and then choose Connect.
The Subscription Services wizard appears.
2. Enter the IP address of the Check Point NG AI Management station.
The Connecting window appears.
3. Enter the Gateway ID and Registration Key which is used while creating the IP40 Dynamic
Object on the LSM.
4. The Connecting window appears.
When the connection is complete, the list of Services downloaded is displayed.
5. Click Finish.
6. Click VPN on the main menu and click the VPN Certificate tab.
Nokia IP40 Security Platform User's Guide v1.1
Installing VPN Certificates
175