Configuring Oob From The Nokia Ip40 Security Platform Gui - Nokia IP40 User Manual

11
Configuring Nokia IP40 Through Out-of-Band Management
Configuring OOB from the Nokia IP40
Security Platform GUI
Configure the modem settings from the IP40 GUI before you use the OOB feature.
To configure the modem settings from the IP40 Security Platform GUI
1. Click Network from the main menu.
The Internet page appears
2. Select the Modem tab.
The Modem page appears.
3. Select Standard or Custom from the Modem Type drop-down list.
For a Custom Modem, you can specify an additional initialization string, apart from the
standard initialization string (see step 6).
4. Select Tone or Pulse from the Dial Mode drop-down list.
5. Select the port speed in bps from the Port Speed drop-down list.
This speed defines the modem port speed. The values can be 9600, 19200, 38400, 57600,
115200, 230400, or 460800 bps.
6. Check Answer incoming PPP calls, to answer the incoming PPP calls.
7. Enter a suitable string next to Initialization String.This string is used to access additional
modem features.
For example, to disable the modem speakers, enter the initialization string ATM0.
Note
To find the suitable to find the suitable init string see the user manual of your modem.
138 Nokia IP40 Security Platform User's Guide v1.1