Enabling And Disabling Telnet Access To Nokia Ip40 - Nokia IP40 User Manual

4. Enter your username and password.You can now, manage your IP40 Security Platform by
using simple commands.
5. Press the tab key to view a list of useful, simple commands to start managing your IP40. For
more information, see Nokia IP40 Security Platform CLI Reference Guide Version 1.1.

Enabling and Disabling Telnet Access to Nokia IP40

Telnet access is disabled by default in Nokia IP40 Security Platform.
Use the following command from the IP40 CLI to enable Telnet access to the device:
set acl service telnet enable
Use the following command from the IP40 CLI to disable Telnet:
set acl service telnet disable
This command disables Telnet access from the WAN, LAN, and DMZ ports.
Nokia IP40 Security Platform User's Guide v1.1
Configuration Methods
61