Call Transfer - Panasonic KX-NS700 Operating Manual

1.3.11 Call Transfer

–
Transferring to an Extension in the PBX
–
Transferring to an Outside Party Using the PBX Service
–
Transferring to an Outside Party Using the SIP Service
•
•
Transferring to an Extension in the PBX
To transfer
PT/PS
During a conversation
Press TRANSFER.
SLT
During a conversation
Press Recall/
hookswitch.
Document Version 2014-08
You can transfer a held call without talking, and go on-hook even if the transferred party
does not answer the call.
If a transferred call is not answered within a specified time, it will ring at a
preprogrammed extension, if set, or at your extension again. If you are off-hook at that
time, you will hear an alarm tone. If an outside call is not answered within a specified
time, it is automatically disconnected.
For users of non-KX-UT series SIP phones:
–
Even if your telephone has a TRANSFER button, you cannot use it to transfer calls.
Please make sure to use the HOLD button.
–
The transfer operation for SIP Extension users may differ from the steps in this
section, and may vary depending on the type of telephone being used.
–
Blind Transfer
Blind Transfer may be available on your phone. For details about using Blind
Transfer, refer to the documentation for your SIP phone. (This feature is not
available when transferring to an outside party using the SIP service.)
(DSS)
OR
C.Tone
extension no.
Press DSS or dial
extension number.
extension no.
C.Tone
Dial extension
number.
Talk.
This step can be omitted.
On-hook.
Talk.
This step can be omitted.
1.3.11 Call Transfer
On-hook.
Operating Manual 51