Troubleshooting - Panasonic KX-NS700 Operating Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-NS700:
Table of Contents

Advertisement

5.2.1 Troubleshooting

5.2 Troubleshooting
5.2.1 Troubleshooting
Troubleshooting
Problem
The telephone does not work properly.
The telephone does not respond when
buttons are pressed.
Some features do not work.
Even though following the manual
instructions, none of the operations work
when using a proprietary telephone.
The paralleled single line telephones do
not ring.
My proprietary telephone does not have a
feature button.
A reorder tone is audible or "Restricted" is
displayed.
344
Operating Manual
Remedy
Confirm with your manager that your settings are
correct.
If the problem persists, consult your dealer.
The telephone is locked.
Unlock your telephone. (
Dial Lock, 2.1.5 Remote Extension Dial Lock)
System management may restrict certain features.
Consult your manager.
The feature numbers have changed.
Confirm the revised number and try again.
The Intercom line was not seized. The seized line,
when going off-hook, was changed by personal
setting. (
3.1.2 Personal Programming)
In the manual, going off-hook means an Intercom
line is seized.
If the setting has been changed, press the INTERCOM
or PDN button after going off-hook and follow the
instructions.
"No ring" may be selected.
Change the setting to ring. (
Telephone)
Some models do not have the feature button.
Change a flexible button to the desired button.
(
3.1.4 Customizing the Buttons)
Enter the specified feature number instead of the
feature button. (
Telephones)
The telephone is locked.
Unlock your telephone. (
Dial Lock, 2.1.5 Remote Extension Dial Lock)
Toll restriction is activated.
Consult your manager or dealer.
An account code is required. (
Code Entry, 1.3.69 Verification Code Entry,
1.3.75 Walking COS)
1.3.25 Extension
1.3.50 Paralleled
1.1.6 Before Operating the
1.3.25 Extension
1.3.2 Account
Document Version 2014-08

Advertisement

Table of Contents
loading

Table of Contents