Panasonic KX-NS700 Operating Manual page 138

1.3.61 Room Status Control
•
The hotel operator must be using a 6-line display PT to use the Room Status Control features.
•
While in Room Status Control mode:
a.
The hotel operator's extension can only check extensions in/out and ready/not ready. All
other operations will be ignored.
b.
The light of each DSS button shows the room status of the corresponding extension as
follows:
Off: Checked-out and Ready
Flashing Red: Checked-out and Not Ready
Red on: Checked-in
[Light Pattern Example: Checked-in Mode]
c.
The lights of other buttons may not show their normal display.
d.
The hotel operator's extension is considered to be busy. Callers to that extension will
hear a busy tone.
To check in a guest
6-Line Display PT
While on-hook
(Check-in)
Press Check-in.
Room: 1234
Confirm check in?
NO
Press "YES".
138 Operating Manual
Check-in button
Check-out button
Cleaned-up button
Enter Room Number
EXIT ENTER
To continue
YES
DSS button
Room101
Room102
Room103
Room104
Room105
ENTER
extension no.
OR
(DSS)
Dial extension number and then press
"ENTER", or press desired DSS.
EXIT
OR
(Check-in)
Press "EXIT"
or Check-in to finish.
Rooms 101 and 103
are currently in
checked-in status.
Document Version 2014-08