Broadcast Mode - Panasonic KX-NS700 Operating Manual

•
* If you do not enter an entry code when making the conference group call, extensions/outside
telephones can join the conversation without needing to enter an entry code.
•
Entry codes can consist of the digits "0" through "9". When " " is used for an entry code, no
one can join a conversation that is already in progress. " " must be used by itself (i.e., you
may not combine it with numeric digits). For details, refer to "
•
A conversation can be established with a maximum of 8 parties (including the caller).
•
If the Hands-free Answerback feature is enabled, the called extension can answer the
conference group call without going off-hook. KX-UT series SIP phones do not support the
Hands-free Answerback feature for a conference group call.
•
With PTs and KX-WT125/KX-TCA185/KX-TCA285/KX-TCA385 PSs, a conference group
call can be automatically answered without going off-hook. This mode is selected through
system programming.
•
If using an SLT or SIP phone, the caller can only originate a conference group call and cannot
control the called parties' call status manually.
For a caller
To end a conversation with a specific party
PT/PS
During a conversation
To end a conversation with a specific party
(DSS)
Press DSS.
To end a conversation with the party who
joined the conversation last
Press TRANSFER.
To disconnect the party who joined the
conversation last from the conference group call
Press FLASH/RECALL.
•
In this case, the FLASH/RECALL button must be set to Flash/Recall mode through system
programming.

Broadcast Mode

If this mode is selected through system programming, the caller can call multiple parties in a conference group,
make a voice announcement, and then establish a multiple party conversation with the called parties. This
Document Version 2014-08
1.3.17 Conference Group Call
Join After Time Out".
Operating Manual 73