Customized Buttons - Panasonic KX-NS700 Operating Manual

1.1.6 Before Operating the Telephones
When You Use a Panasonic Proprietary Telephone or KX-UT Series SIP
Phone
Panasonic proprietary telephones and KX-UT series SIP phones have useful feature buttons that simplify some
operations. For details, refer to the "Location of Controls" or equivalent section in the documentation for your
phone.

Customized Buttons

If the term is in parentheses like (Account) in this manual, it means a flexible button has been made into an
"Account" button. For more information, refer to "3.1.4 Customizing the Buttons" when using a PT or PS, or
"Customizing the Flexible Buttons" when using Web Maintenance Console.
Note
For KX-UT series SIP phone users:
•
KX-UT113/KX-UT123: Customized buttons are not available.
•
Other than KX-UT113/KX-UT123: The following buttons can be customized:
–
Single-CO (S-CO)
–
DN
–
One-touch Dialing
–
Log-in/Log-out
–
DSS
Button
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
Direct Station Selection
(DSS)
One-touch Dialing
Incoming Call Distribution
Group (ICD Group)
Message
Message for Another
Extension
Call Forwarding (FWD)/Do
Not Disturb (DND)—Both
calls
FWD/DND—Outside calls
26 Operating Manual
–
Headset
–
Wrap-up
–
Call Park
–
Call Park (Automatic Park Zone)
Used to access an idle CO line for making outside calls.
Incoming outside calls from any CO line arrive at this button.
Used to access an idle CO line in a specified CO line group for making
outside calls.
Incoming calls from CO lines in the assigned CO line group arrive at this
button.
Used to access a specified CO line for making or receiving outside calls.
Used to access an extension with one touch.
It is also possible to be changed to the other feature button.
For KX-UT series SIP phones (except KX-UT113/KX-UT123), unlike a
One-Touch button, this type of button cannot be used to dial feature
numbers.
Used to access a desired party or system feature with one touch.
Used to access a specified incoming call distribution group for making or
receiving calls.
Used to leave a message waiting indication or call back the party who left
the message waiting indication.
Used to have a Message button for another extension.
Used to forward all calls to a specified destination or refuse.
Used to forward CO line calls to a specified destination or refuse.
Feature
Document Version 2014-08