1.3.14 Character Entry
Table 2 (Option mode)
<Example> To enter "Ann"
A
2
Note
•
To erase the character on the cursor, press CLEAR.
•
To move the cursor to the left, press
•
To move the cursor to the right, press
button consecutively (e.g. "G" and "I"), you must press this button or the FWD/DND button after entering
the first character.
•
If the SELECT button is pressed, the characters for each button will be displayed in reverse order.
•
To toggle between Table 1 and Table 2 when using a KX-NT300 series (except KX-NT321)/
KX-NT500 series telephone, press the leftmost soft button.
64
Operating Manual
n
6
(5 times)
OR
n
6
(5 times)
.
. When entering two or more characters that use the same
Document Version 2014-08