1.3.55 Private Network Features—CLIR (Calling Line Identification Restriction)
To show either the number assigned to the CO line or your extension
PT/SLT/PS/SIP Extn.
Off-hook.
•
When you forward a call to an outside party, the CLIP number for that call will be that of the
calling party or of the forwarding extension depending on system programming.
•
If you use the ICD Group button to make a call to the other party, the telephone number
assigned to the ICD group will be used.
1.3.55 Private Network Features—CLIR (Calling Line Identification
Restriction)
When making a call through a private network, you can select whether the called party can see your telephone
number or not.
To show/prevent
PT/SLT/PS/SIP Extn.
Off-hook.
•
You can change the mode by pressing a preset CLIR button while on-hook (There is no CLIR
button on KX-UT series SIP phones).
The CLIR button light shows the current status as follows:
Off: shows your telephone number.
Red on: prevents your telephone number being displayed.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Calling Line Identification Restriction (CLIR) button.
134
Operating Manual
7
2
Enter
7 2.
7
1
Enter
7 1.
1
Public
OR
C.Tone
Your extension
2
Enter 1 for public or 2
for your extension.
0
Show
OR
C.Tone
1
Prevent
Enter 0 to show
or 1 to prevent.
On-hook.
On-hook.
Document Version 2014-08