Adjusting The Headlight Beams - Yamaha PZ50RTD Owner's Manual

3. Remove the bulb holder cover.
PZ50RT / PZ50GT / PZ50MT
1. Headlight coupler
2. Bulb holder cover
PZ50VT / PZ50MP
1. Headlight coupler
2. Bulb holder cover
4. Unhook the bulb holder, and then remove
the burnt-out bulb.
1. Bulb holder
Periodic maintenance and adjustment
5. Install a new bulb, and then hook the bulb
holder onto the headlight unit. NOTICE:
Keep oil and your hands away from
the glass part of the bulb or its life and
illumination will be affected. If the
glass is oil stained, thoroughly clean it
with a cloth moistened with alcohol or
lacquer thinner.
1
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
6. Install the bulb holder cover, and then
connect the headlight coupler.
7. Install the top cover (PZ50RT / PZ50GT /
PZ50MT) or close the shroud (PZ50VT /
PZ50MP).
ESU12280

Adjusting the headlight beams

Turn the headlight beam adjusting screws in
or out to adjust the headlight beams. The
headlight beams move as follows depending
on the turning direction of the headlight beam
adjusting screws.
Direction (a): Down and to the left
●
Direction (b): Up and to the right
●
Direction (c): Down and to the right
●
Direction (d): Up and to the left
●
[ECS00621]
85