Starting Up Failed Minor Errors (15.Xx); Controller Load Failed Minor Errors (17.Xx) - Stratasys Dimension 768/Elite Service Manual

Starting Up Failed Minor Errors (15.XX)

Code Description
15,01 Startup state activation failed
15,02 Timeout period expired while
starting up

Controller Load Failed Minor Errors (17.XX)

Cod
Description
e
17,01 LG_COMMAND Failed on
Controller
17,02 LG_COMMAND Timeout
Corrective Actions
Software use only
1. See CFG file for additional error details.
2. Replacement Controller or Hard Drive is gendered incorrectly.
3. If printer is in Dynamic Mode:
a. Issue may be a network timeout due to improper DHCP settings on
the network. Verify by looking at CFG, if code reads:
- MASTER logger: Punching nameserver xxx.xxx.xxx.xxx through the
firewall.
b. If using System Software version 2230 try workaround. Contact CS for
workaround instructions.
c. Upgrade System Software to a version newer than 2230.
4. Material Bay Connection timeout. Refer to error code 14,139.
Corrective Actions
Software use only.
Software use only.
4-23