Front Wheel Removal - Honda GL1100 interstate Owner's Manual

FRONT WHEEL REMOVAL
l
Raise the front wheel off the ground
by placing a support block under the
engine.
2. Remove the
speedometer cable set
scrcw (1) and disconnect the speedo-
me t er ca b le (2 ).
3. Remove the left
caliper assembly by
loosening the caliper bolts (3).
4. Remove the left caliper bracket (4) by
removing the mounting bolts (5)
(2) Speedometer cable
52
CAUTION:
* Support the coliper Lssembly so that it
does not hang from the btake hose. Do
not twist the brake hose.
* At,oid getting gredse, oil or dirt on the
disc
or
pad surfaces, because such
contamination can cause poor brake
petformance
or lapid pad weat after
reassembly.
5. Remove the front axle holder nuts (6)
and axle holders (7).
6. Remove the wheel.
( 1) Spe ed ome ter ca ble set sc r ew ( 3 )Ca lip er b o lts
r4) Caiiper bracket (6) Axle holder nuts
(5) Motnting bolh (7) Axle holders