Front Wheel Removal - Honda GL1100 Owner's Manual

FRONT WHEEL REMOV AL
I. Raise the front wheel off the ground
by placing a support block under the
engine.
2. Remove the speedometer cable set
screw (I) and disconnect the
speedo~
meter cable (2).
3. Remove either caliper assembly by
loosening the caliper bolts (3).
,
~
L-
(1) Speedometer cable set screw (3) Caliper bolts
(2) Speedometer cable
CAUTION:
Support the caliper assembly so that it
does not hang from the brake hose. Do
not twist the brake hose.
4. Remove the front axle holder nuts (4)
and axle holders (5).
5. Remove the wheel.
(4) Axle holder nuts
(5) Axle holders