Strut Pin & - Hangar 9 Taylorcraft 20cc ARF Assembly Manual

Step 10
Prepare the strut pins by sliding on a silicone spacer.
Step 11
Adjust the length of the strut end fittings by turning
them as needed to align them with the strut fitting on
the fuselage. Insert the strut pins and spacers.
Hangar 9 Taylorcraft 20cc Assembly Manual
Step 12
Insert the keepers in the strut pins.
Step 13
Apply a drop of threadlock to the threads at the end of
the strut fitting.
Step 14
Use a 9/32-inch open-end wrench to tighten the hex
nut against the strut end fitting.
Repeat steps 7 through 14 for the opposite side.
Step 15
Install the pilot figure, shown here with helmet and life
jacket removed. The boots have also been removed
for ease of installation.
47