Hangar 9 Taylorcraft 20cc ARF Assembly Manual page 42

Step 6
Attach the receiver to radio compartment floor with
double-sided adhesive tape.
Step 7
Fasten the hook and loop tape over the receiver.
42
Step 8
Connect the power lead from the chargeswitch to the
receiver battery port.
Step 9
Plug the rudder and two elevator servo leads into the
receiver.
Step 10
Plug the throttle servo lead into the receiver.
Step 11
Plug two 12-inch servo extension leads into the re-
ceiver for the ailerons. Route the leads to each side of
the fuselage and up through the unused switch port.
Hangar 9 Taylorcraft 20cc Assembly Manual