Using The Manual; Ultracote Covering Colors; Before Starting Assembly; Workspace Preparation - Hangar 9 Taylorcraft 20cc ARF Assembly Manual

Using the Manual

This manual is divided into sections to help make
assembly easier to understand, and to provide breaks
between each major section. In addition, check boxes
have been placed next to each step to keep track of
completed sections. Steps with a single box ( ) are
performed once, steps with two boxes (
that the step needs to be repeated, such as for left
and right wing panel, or two servos etc.
Before beginning it is a good idea to read through the
manual completely to familiarize yourself with the
assembly process. Remember to take your time and
follow the directions.
UltraCote Covering Colors
®
● White
● Black
● True Red
● 2-inch squares, Red/White

Before Starting Assembly

Before beginning the assembly of your model, remove
each part from its bag for inspection. Closely inspect
the fuselage, wing panels and tail section for
condition. If you find any damaged or missing parts
contact the place of purchase.
Any wrinkles in the covering can be removed with a
heat gun or covering iron. Use caution while working
around edges and areas where colors overlap to
prevent separating the covering.
4

Workspace Preparation

During the course of building your Taylorcraft we
suggest that you use a soft base on the building
surface. Such things as a foam stand, large piece of
bedding foam or a thick bath towel will work well and
help protect the model from damage during assembly.
) indicate
A flat area measuring at least 24 x 72-inches is
required to work on the model sub-assemblies
comfortably. The completed and assembled model
requires a space of 72 x 90-inches. Ensure you have
adequate lighting, and a place to set aside parts that
have been completed.

Radio System Requirements

Spektrum Radio System
HANU870
● DX7 7-channel radio with receiver (SPM2710)
HANU874
● JRPS821 DS821 Digital Sport servo (5)
HANU866
● JRPS537 Standard servo for throttle
HANU944
(not required for EP version)
● JRPA098 12-inch servo extension (4)
● JRPA004 Deluxe Chargeswitch
● JRPB5008 2700mAh receiver battery
Optional Item
● 2-1/2" Aluminum Spinner (TRU2502B120)
Recommended Setup–Gas
● Zenoah G20EI (ZENE20EI)
● Evolution propeller 16x6 (EVO16060)
● Deluxe Chargeswitch (JRPA004)
● Ignition Battery 4500mAh (JRPB5004)
● Gas fuel tubing (DUB799)
Recommended Setup–Electric
● E-flite Power 110 (EFLM4110A)
● Phoenix HV-85 ESC (CSEPHX85HV)
● Thunder Power 4S 5000mAh Li-Po (2)
● APC Propeller 18x8E (APC18080E)
Recommended Setup–2-stroke Glow
● Evolution 1.20NX with muffler (EVOE1200)
● Evolution propeller 16x6 (EVO16060)
Recommended Setup–4-stroke Glow
● Saito FA-125A (SAIE125A)
● Evolution propeller 16x6 (EVO16060)
Important Warranty Information
Please read our Warranty and Liability Limitations section
on Page 52 before assembling this product. If you as the
purchaser are not prepared to accept the liability
associated with the use of this Product, you are advised
to return this Product immediately in new and unused
condition to the place of purchase.
Hangar 9 Taylorcraft 20cc Assembly Manual