Hangar 9 Taylorcraft 20cc ARF Assembly Manual page 15

Step 6
Place the tailwheel assembly over the mounting holes
on the rear fuselage. Use a 3/32-in hex wrench to
install a #4 x 3/4-in socket head wood screw and #4
steel washer in the forward mounting hole.
Step 7
Locate the aluminum mounting tab from the tail brace
parts bag.
Hangar 9 Taylorcraft 20cc Assembly Manual
Step 8
Place the aluminum tab on the tailwheel assembly
over the rear hole. Use a 3/32-in hex wrench to install
the second mounting screw and washer.
Step 9
Use needle nose pliers to bend a loop in each end of
the tailwheel steering springs and attach them to each
end of the steering tiller on the rudder and tailwheel
assembly.
Step 10
The springs should be under slight tension when
installed. Form the springs to approximately equal
lengths and adjust as necessary to align the tailwheel
with the rudder.
15