Sms On A Pabx; Activating/Deactivating First Ring Muting; Activating/Deactivating The Sms Function - Siemens GIGASET A580 User Manual

SMS (text messages)

SMS on a PABX

u
You can only receive an SMS when the Calling Line Identification is for-
warded to the extension of the PABX (CLIP). The CLIP evaluation of the
phone number for the SMS centre takes place in your Gigaset.
u
If required, you must prefix the number for the SMS centre with the access
code (depending on your PABX).
If in doubt, test your PABX, e.g. by sending an SMS to your own number:
once with and once without the access code.
u
When you send SMS messages, your sender number may be sent without
your extension number. In this case the recipient cannot reply to you
directly.
Sending and receiving SMS messages on ISDN PABXs is only possible via the
MSN number assigned to your base station.

Activating/deactivating first ring muting

§Menu§
M 4 O O
Q
§OK§
Or:
§OK§

Activating/deactivating the SMS function

If you deactivate the SMS function, you cannot send or receive any SMS mes-
sages with your phone.
The settings you have made for sending and receiving SMS messages (e.g. the
numbers of the SMS centres) and the entries in the incoming and draft mes-
sage lists are saved even after you turn off your phone.
§Menu§
M4 O 2 L
Q
§OK§
Or:
§OK§
72
Press the display key.
Press keys.
Make the first ring audible.
Mute the first ring.
Press the display key.
Enter the digits.
Deactivate SMS function.
Activate SMS function (default setting).