Table of Contents
Advertisement
Step by Step
>
11=Mobility?
2=Log off?
If the DLS server is not available in the LAN or an
incorrect server address was stored in the tele-
phone, your logon request is rejected with the
message "DLS Server not available". Please con-
tact your service personnel in this case.
Logging off at the Telephone
Prerequisite: You are logged on as a mobility user.
If available, press the "Mobility" key. The logoff proce-
dure is started.
or
:
Select and confirm.
>
:
Confirm to start the logoff procedure.
>
o
If requested, enter your User password (default value:
"000000").
If you entered an incorrect User password, the
message "Logoff failed" is displayed until
•
you entered the correct User password and
thus logged off successfully, or
•
your service personnel cleared the message.
The following messages appear on the display:
•
„Mobility logoff: Uploading user data"
•
„Mobility logoff: Registering..."
•
"Downloading user data" (base user)
You can also log off using the web interface. For
this feature, please see the Chapte „Web
Interface (
If an optiPoint display module is connected and
you use a different language setting as "mobility
user", you are asked to Restart (
telephone so that the change of language setting
can also be done for the optiPoint display mod-
ule.
As soon as the telephone has returned to the "base us-
er", MOB disappears from the display.
DLS Mobility Funktion
page 207).
page 130) the
87
Advertisement
Table of Contents
