Safety Precautions; Protection Of The Telephone; Location Of The Telephone - Siemens HiPath 8000 optiPoint 410 User Manual

V7.0 economy/economy plus/standard
Table of Contents

Advertisement

Safety Precautions

Safety Precautions
For Your Safety
The IP telephone optiPoint 410/420 economy/economy plus/
standard S V7 .0 complies with the European standard EN 60 950, which
deals with the safety of information technology appliances including elec-
tronic office equipment. This device has been designed with safety in
mind, thus protecting both individuals and objects.
There is always the danger of small objects being swallowed by young chil-
dren. In the case of the optiPoint 410/420 economy/economy plus/
standard S V7 .0, this applies in particular to the connecting cord clip.
Please make sure that such items are not accessible to children.

Protection of the Telephone

Location of the Telephone

2
Use only the enclosed power supply together with the special LAN
cable
Never open the power supply enclosure
The telephone must not be used in bathrooms, etc. as it is not splash-
proof.
Before connecting or disconnecting the LAN cable, pull the power plug
out of the plug receptacle first.
The device must not come into contact with abrasive liquids or liquids
which are liable to discolor it, such as tea, coffee, fruit juices or soft
drinks.
The telephone should be operated in a controlled environment with an
ambient temperature between 5 °C and 40 °C (41 °F and 104 °F).
To ensure good handsfree talking quality, the area in front of the micro-
phone (front right) should be kept clear. The optimum handsfree dis-
tance is 20 inches (50 cm).
Do not install the telephone in a room where large quantities of dust
accumulate; this can considerably reduce the service life of the tele-
phone.
Do not expose the telephone to direct sunlight or any other source of
heat, as this is liable to damage the electronic equipment and the plas-
tic casing.
Do not operate the telephone in damp environments such as bath-
rooms.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hipath 8000 optipoint 420 s

Table of Contents