Callback - Siemens HiPath 8000 optiPoint 410 User Manual

Operating the Telephone with the Display
Step by Step
Dial?

Callback?

Answer call?
>
14=Cancel callbacks?
Cancel Callbacks
36
Callback
If the other party is busy , you can place a request for
callback. Callback is a HiPath 8000 function and has to
be programmed by service personnel. You are request-
ed to confirm callback if "Busy" appears on the display.
Prerequisite: The callback function must be activated
(see . page 110).
n
Lift the handset
o
Enter the number and
:
confirm.
>
Placing a callback request
The other party is busy.
:
Confirm. The callback request is stored in the system.
>
Callback is activated
You are called by the system as soon as the party beco-
mes free. The number of the party who has become
available is indicated on the display.
:
Confirm. The connection to the callback party is set up.
>
Canceling callback requests
If for any reason callback requests are no longer re-
quired, you can cancel them.
Prerequisite: The telephone is in idle mode.
:
Confirm.
>
or
Press the Cancel Callbacks key (this must be program-
med ( page 117)
All callback requests are then cancelled.