How To Access A Function; Using Codes; And System Codes; Using A Function Key - Siemens optiPoint 500 entry Operating Instructions Manual

Step by Step
Consultation

How to access a function

... using codes

F==
Activating call forwarding
G==
Activating call forwarding
FB
Entering a callback request
GB
Cancelling a callback request
When you activate or switch on a function, you always
begin by pressing the "st ar" key; when you deactivate,
switch off or cancel a function, you always begin by
pressing the "square" key.
As the examples show, codes can consist of either one
or two digits.
... using UK codes, Standard codes,
Euro codes, special codes

and system codes

System Suppor t will inform you which codes apply to
your Hicom 30 0 H system.
The Appendix to these Operating Instructions contains
an overview of the p ossib le cod es.
If your optiPoint 500 entry does not have a "store" key,
storage of a call forwarding destination can be initiated
by lifting the handset and dialling the special code.
Replace the handset once you have entered the call
forwarding destination (Æ page 27).
Note that all these types of codes are included in the
descriptions in the central p art of these Operating In-
structions.

... using a function key

You can activate directly those functions for which a key
has been programmed , for example:
Press the key. The function is executed
(if it is available in the particular situation).
How to access a function
5 5 5 5