Using Group Features; Call Pickup Groups - Siemens HiPath 8000 optiPoint 410 User Manual

Step by Step
Operating the Telephone with the optiPoint display module

Using Group Features

Your telephone can be assigned to a pickup group to en-
sure optimum handling of specific calls.

Call Pickup Groups

The administrator can combine several telephones to
form a pickup group. If your telephone is in a pickup
group, you can answer calls on behalf of another group
member. You can only belong to one pickup group at a
time.
The administrator can set up your pickup group as fol-
lows:
Notification service: you are notified of pickup
•
group calls in exactly the same way as other
incoming calls.
• User-initiated service: if there is a call for the pick-
up group, you can answer it by pressing Group
Pickup.
Answering Group Pickup Calls
There is a call for a pickup group at:
Call Control
Mon 07/03/05 11:34AM
+44 123456 78910
Group Pickup
Pickup
Contacts
Press the call information box Group Pickup to answer
the call.
179