Table of Contents
Advertisement
Alphabetic Reference
This glossary provides basic information required for performing configura-
tion tasks on the optiPoint 410/420 economy/economy plus/
standard S V7 .0.
•
The section "Alphabetic Reference" explains terms found in the menus
in alphabetic order.
•
Clicking the icons will bring you to the relevant function descriptions:
–
Using the icons on the optiPoint 410/420 economy/economy plus/
standard S V7 .0
–
Using the icons via the web interface
Append Codes
Append codes are control functions that are accepted at any position with-
in the repertory dialing sequence.
The following options are available for selection:
Function
OK
Clear
Consult
Pause
page 213
Audible secure call indicator
If the function is activated, you hear an acoustic signal if the voice connec-
tion is not secure.
page 216
Auto-Dial Timer
Timeslot (in seconds) between the last digit input and the start of the dial-
ing procedure.
•
Minimum value: 1
•
Maximum value: 8
•
Default value: 6
page 215
Call Forwarding Locked Destination
Enter the destination to which calls are to be forwarded when the tele-
phone is locked (see also
page 215
Status Indication
Any characters following this function are sent im-
mediately as DTMF signals after the call has been
answered.
Clear the current call at this point.
Establish a consultation call at this point.
Any characters following this function are sent af-
ter three seconds.
page 119
page 112
page 98
page 221).
page 115
Web Interface
217
Advertisement
Table of Contents
