Step by Step
>
Create local Conf.?
>
Local Conf. disconnect? >
>
Clear both calls?
Conferencing
You can't use this function with optiPoint 410/
420 economy/economy plus
This feature is sometimes known as three-way calling.
Prerequisite: You are conducting a consultation call
(
page 47).
Introducing the Conference
Prerequisite: You are conducting a consultation call
(
page 47).
:
Select and confirm. The following appears in the dis-
>
play: "Creating local Conf.
"In Conference" appears on the display.
If you were on a secure call and you initiate a con-
sultation call, the current call is put on hold. The
new call from the consultation call can be secure
or unsecure. If call three parties then enter a con-
ference call, the initial connection remains se-
cure. As soon as the connection to one partner is
not secure, the entire conference is not secure.
(see also
Ending the Conference
Changing back to single-line calls
:
Confirm.
You are reconnected with the first party. The second
party is placed on hold. You can now:
•
alternate between the two parties;
•
connect the two other parties (transfer);
•
re-enter the conference call;
•
terminate the active call – you are connected to the
second party.
or
End both calls using the menu
:
Select and confirm. Both calls are terminated, and the
>
display shows "Cleared". You can start a new call.
Operating the Telephone with the Display
"
page 23)
49