Table of Contents
Advertisement
Customizing the Telephone
Step by Step
>
5=Audio settings?
1=Loudspeaker vol.?
124
Audio Settings
Use this menu to adjust the volume of the ringer tone
with which your telephone signals incoming calls, the
volume of the loudspeaker and the handset volume,
and set the room acoustics for handsfree talking.
Prerequisite: You are in the "Setup" menu
:
Select and confirm.
>
You will find an overview of the options from
page 229.
Loudspeaker Volume
In Idle Mode
Adjust the volume of the loudspeaker, the handset loud-
speaker, and the ringer tone when the telephone is in
idle mode. The lowest loudspeaker volume is 1 and the
highest volume is 8.
Open the Audio Settings menu (see above).
Prerequisite: You are in the "Audio Settings"
menu
:
Confirm. The current volume is displayed.
>
The value can be increased or reduced by using either
uv
the control keys on the telephone or
<>
the arrow keys or
o e
l
to
the keypad keys.
:
Confirm the setting. The new setting is displayed as a
>
value.
During a Call
You can adjust the volume of the loudspeaker, or the
handset loudspeaker using the
phone call. Then press the
Otherwise the setting will only apply to the current call.
The "Loudspeaker volume" menu disappears after five
seconds if you do not make any entries.
page 124.
:
page 90.
v
u
and
keys during a
key to save the setting.
Advertisement
Table of Contents
