Operating The Telephone With The Optipoint Display Module; Using The Display; Call View Start Display - Siemens HiPath 8000 optiPoint 410 User Manual

Operating the Telephone with the optiPoint display module

Step by Step
132
Operating the Telephone with the
optiPoint display module
Product support for the optiPoint display module
by Siemens Service was discontinued at the end
of 2006.
The optiPoint display module can not be connec-
ted to the optiPoint 410/420 economy/
economy plus

Using the Display

To select the control elements on the display, use the
stylus provided or a similar object that will not damage
the display surface. Please read the instructions on
page 204.

Call View Start Display

Prerequisite: "Use DSM" is enabled (
the telephone is not locked (
When you connect the telephone for the first time or re-
start it, a message appears prompting you to press the
display to start Call Control. The idle display appears.
Press the Menu icon to see which menu options are
available when the telephone is in the idle state.
Call Control
Mon 07/03/05 11:34AM
+44 123456 78910
Contacts
page 115).
Call Log
Redial Last No.
Group Pickup
Forward Calls
Do not disturb
Cancel Callbacks
Ringer on
Setup
page 105) and