Alphabetic Reference - Siemens optiPoint 410 User Manual

Web Interface

Alphabetic Reference

This glossary provides basic information required for performing configura-
tion tasks on the optiPoint 410/420 economy/economy plus/
standard S V6.0.
•
•
Append Codes
Append codes are control functions that are accepted at any position with-
in the repertory dialing sequence.
The following options are available for selection:
Function
OK
Clear
Consult
Pause
Auto-Dial Timer
Timeslot (in seconds) between the last digit input and the start of the dial-
ing procedure.
•
•
•
Call Forwarding Locked Destination
Enter the destination to which calls are to be forwarded when the tele-
phone is locked (see also
180
The section "Alphabetic Reference" explains terms found in the menus
in alphabetic order.
Clicking the icons will bring you to the relevant function descriptions:
– Using the icons on the optiPoint 410/420 economy/economy plus/
standard S V6.0
– Using the icons via the web interface
page 176 page 92
Minimum value: 1
Maximum value: 8
Default value: 6
page 178 page 73
page 178
Status Indication
Any characters following this function are sent im-
mediately as DTMF signals after the call has been
answered.
Clear the current call at this point.
Establish a consultation call at this point.
Any characters following this function are sent af-
ter three seconds.
page 183).