Notes And Symbols; Safety; Reference To Operation Steps - Siemens 2000 Administration Manual

Notes and Symbols

Notes and Symbols

Safety

Information that is important for preventing injury or damages is marked
specially, as they are important instructions for correct use of the unit.
7

Reference to operation steps

The following symbols are used to indicate the different operation-related
sequence descriptions:
Operation of the optiPoint 410 entry.
Operation of the optiPoint 410/420 economy/economy plus/standard/ad-
vance and.
Operation through the web-based management tool.
This symbol indicates a hazard. Failure to follow the instructions giv-
en may result in injury or in damage to the unit.
Key information important for the proper use of the unit is marked
with this symbol.
General Information
9