Select Zones - Bosch Plena Operating Manual

Plena
7.4.5

Select zones

Select the zones to which the live speech must be distributed with the Zone select buttons on
the front of the voice alarm controller or the remote controls. A red LED indicates the zones to
which the live speech is distributed.
–
–
Notice!
If no additional action is taken within 10 seconds after the last Zone select button has been
pushed (for example closing the PTT switch), the zone selection is cancelled.
Figure 7.11: Zone select buttons
To select all zones, push the All call buttons on the front of the voice alarm controller or the
remote controls.
Figure 7.12: All call button
Bosch Security Systems B.V.
If the indicator of a Zone select button is off, the zone is not selected. Push the button to
select the zone.
If the indicator of a Zone select button is on, the zone is selected. Push the button to
deselect the zone.
Fault EMG
Ack
Zone select
Reset
Zone1
Alert message
Alarm message
EMG mic
Installation and Operation manual
Zone2
All call
Indicator test
Operation | en 93
2013.07 | V2.0 |