En60849 - When Using The Remote Control Kits - Bosch Plena Operating Manual

Plena
Clause / Requirement
c Identification of parts requiring
d Original versions of equipment and
e List and location of spare parts.
f
g Test certificates as required to be
h A set of "as fitted" drawings.
11.1.3

EN60849 - When using the Remote Control Kits:

The Plena Voice Alarm System Remote Control Kit and the Plena Voice Alarm System Remote
Control Extension Kit are versions of the Remote Control and Remote Control Extension with
connector interfaces instead of LED and buttons. These kits enable the use to built custom
panels for the Voice alarm System. Functionality and firmware is identical to the remote
control (extension). The compliancy to IEC60849 is valid as long as the buttons and LED's/
lamps are connected correctly. This should be done by a qualified electrician. Furthermore the
final installation should always be tested according to the above standard to ensure proper
functioning.
When installing in a 19" rack please ensure the following:
–
–
–
–
–
Bosch Security Systems B.V.
maintenance, giving reference to the
location of items on drawings, together
with manufacturer's reference numbers,
and the addresses, telephone and
facsimile numbers, of suppliers of
materials and parts.
materials catalogues.
List and location of special tools.
The maintenance instructions should
also include:
examined by the relevant authority.
Ventilation requirements are met and ambient temperature inside rack is below 55
degrees.
Indications are visible from the outside.
The sounder is audible.
Access level control is met if applicable.
The rack is properly grounded.
Installation and Operation manual
Compliance
Preventive Maintenance:Vacuum
cleaning of the Controller and the
external power amplifier(s) every
+/- 2 years (depending on the
ambient dust).When used,
vacuum clean the rack mounting
filters of the cooling fans +/- 2
years (depending on the ambient
dust).Prevent or remove animal
nests (mice and rats can eat the
cabling).
Compliant. For this purpose
retain the original data sheets
and the Installation and
Operation manuals.
Responsibility of the installer.
N/a
Responsibility of the installer.
Responsibility of the installer.
Appendices | en 135
Signature
2013.07 | V2.0 |