Important Safety And Product Information - Danfoss ECL Comfort 310 Installation Manual

Installation Guide

1.1 Important safety and product information

1.1.1 Important safety and product information
This Installation Guide is associated with ECL Application Key A376
(order code no. 087H3810).
The functions can be realized in ECL Comfort 310 which includes
M-bus, Modbus and Ethernet (Internet) communication.
The applications A376.1/ A376.2 / A376.3 / A376.9 comply with
ECL Comfort controller 310 as of software version 1.11 (visible at
start-up of the controller and in 'Common controller settings' in
'System').
Additional documentation for ECL Comfort 310, modules and
accessories is available on http://den.danfoss.com/.
2 DEN-SMT/DK
ECL Comfort 310, application A376
Automatic update of controller software:
The software of the controller is updated automatically when the key
is inserted (as of controller version 1.11). The following animation will
be shown when the software is being updated:
Progress bar
Safety Note
To avoid injury of persons and damages to the device, it is absolutely
necessary to read and observe these instructions carefully.
Necessary assembly, start-up, and maintenance work must be
performed by qualified and authorized personnel only.
The warning sign is used to emphasize special conditions that should
be taken into consideration.
This symbol indicates that this particular piece of information should
be read with special attention.
As this Installation Guide covers several system types, special system
settings will be marked with a system type. All system types are shown
in the chapter: 'Identifying your system type'.
VI.GU.B1.02
Danfoss District Energy