Danfoss ECL Comfort 310 Installation Manual page 63

Installation Guide
Setting the desired room temperature, ECA 30 / ECA 31
The room desired temperature can be set exactly as in the
controller. However, other symbols can be present in the display
(please see 'What do the symbols mean?').
Setting the desired DHW temperature
The desired DHW temperature can easily be adjusted in the
overview displays for the DHW circuit.
Action: Purpose:
Desired DHW temperature
Confirm
Adjust the desired DHW temperature
Confirm
In addition to the information about desired and actual DHW
temperature, the today's schedule is visible.
The display example indicates that the controller is in scheduled
operation and in comfort mode.
Danfoss District Energy
ECL Comfort 310, application A376
Examples:
50
55
Overview of setting range and settings for desired room temperature:
Mode
Comfort
Saving
Frost protection*
* related to desired flow temperature
The setting of the desired room temperature is important even if a
room temperature sensor / Remote Control Unit is not connected.
With the ECA 30 / ECA 31 you can override the desired room
temperature set in the controller temporarily by means of the override
functions:
VI.GU.B1.02
Setting range Factory setting
5... 40 °C 20 °C
5... 40 °C 16°C
5 ... 40 °C 10 °C
DEN-SMT/DK 63