Rs-232 Parameters - Atlona AT-HDVS-200-TX User Manual

Commands with HDVS-200-RX
Command
VidOutRes X
e.g. VidOutRes 22
Aspect X
e.g. Aspect 2
Each command is terminated with a carriage return.
Feedback is terminated with a carriage return and line feed.
Note: If the command fails or is incorrect the feedback should be "Command FAILED"
Output Resolution -
0 800x600p60
5 1400x1050p60
10 1280x720p25
15 1280x720p60
20 1920x1080p24 21 1920x1080p25 22 1920x1080p29 23 1920x1080p30 24 1920x1080p50
25 1920x1080p59 26 1920x1080p60 27 Input
Aspect Ratio -
1 Full
Note: Incorrect aspect ratio will display with horizontal or vertical bars to fill the excess space

RS-232 Parameters

Default baud rate to control the switcher is 115200.
Note: For the display's actual baud rate, refer to the owner's manual
To change the baud rate of the switcher
, the commands below will be needed:
control)
Switcher parameter command
CSpara[baudrate,data-length,parity,stop-bit]
e.g. To change the baud rate to 38400 use CSpara[38400,8,0,1]
Note: Use this command if the connected control system does not output 115200
Zone output parameter commands
RS232para[baudrate,data-length,parity,stop-bit]
e.g. To change the output baud rate to 19200 use RS232para[19200,8,0,1]
Note: Use this command if the connected display uses a different baud rate
RS232zone[command]
Once the switcher and zone output have been set up for the best communication, commands
can be sent to control the display. The commands will come from the user manual of the display
or projector. The commands and any carriage returns/line feeds in the commands will need to be
placed in the bracket.
e.g. To turn the display or projector on if the command is PWRON carriage return, use the command:
RS232zone[PWRON
Note: = carriage return
CR
atlona.com
Feedback Description
VidOutRes X Set the output resolution x=0-27, sta
e.g. VidOutRes 22 e.g. Set the output resolution to 1920x1080p29
Aspect X Set the output aspect ratio x=0-4
e.g. Aspect 2 e.g. Set the output aspect ratio to 16:10
1 1024x768p60 2 1280x800p60
6 1600x900p60RB 7 1600x1200p60
11 1280x720p29 12 1280x720p30
16 1920x1080i50 17 1920x1080i59
2 16:9 3 16:10
(for display control)
]
CR CR
3 1280x1024p60
8 1680x1050p60
13 1280x720p50
18 1920x1080i60
28 Native
4 4:3
or the zone output
(for switcher control)
(data-length, parity, and stop-bit for switcher must be 8,0,1)
19
4 1366x768p60
9 1920x1200pRB
14 1280x720p59
19 1920x1080p23
sta
5 Keep Ratio
(for display/projector
Toll free: 1-877-536-3976
Local: 1-408-962-0515