Category Cable - Atlona AT-HDVS-200-TX User Manual

Category Cable

For the category cables used in the installation of these products, please be sure to use a 568B
termination as pictured below:
Use the table below to verify the best category cable for the installation.
Performance Rating
Wiring
Solid
Stranded - Patch
cable
(Not recommended)
Important! 4K
(UHD)
use CAT6a/7 solid core cables for best results.
Note: For cable distances see the specifications on page 20
Connector
Connector type and size is very important to ensure extenders work correctly. Please use the
matching cable type with the correct RJ45 connector.
CAT5e cables should use only CAT5e RJ45 connectors
CAT6 cables should use only CAT6 connectors
CAT6a cables should use only CAT6a connectors
CAT7 cables should use only CAT7 connectors
Using the wrong size connectors may result in interference causing loss of signal.
Important! "EZ RJ45 connectors" are not recommended with HDBaseT extenders. Doing so may result in interference
with audio and video transmission.
Note: To ensure compatibility, please be certain both transmitter and receiver have blue HDBaseT ports. This
ensures both products are PoE (48V) compliant. The HDVS-200-TX is not compatible with PoCC
(black RJ45, 24V) devices
atlona.com
Shielding
Shielded (STP/FTP)
Unshielded (UTP)
Unshielded (UTP)
Shielded (STP/FTP)
Termination
signals are sensitive to cable quality and installation technique. It is recommended to
1. White - Orange
2. Orange
3. White - Green
4. Blue
5. White - Blue
6. Green
7. White - Brown
8. Brown
Type of LAN cable
CAT5e/6
***
**
*
*
Please use EIA/TIA-568-B termination
5
CAT6a/7
****
N/A
N/A
N/A
Toll free: 1-877-536-3976
Local: 1-408-962-0515