Rs-232 & Tcp/Ip; Terminal; Connection - Atlona AT-O-451 User Manual

RS-232 & TCP/IP

Terminal

To set up the RS-232 terminal the first thing needed is to find the RS-232 communications port
under the computer's device manager. Once there, right click the port and select "Properties".
Under the properties menu select the port settings tab and set the menu to the switcher default:
Bits per second: 115200, Data bits: 8, Parity: None, Stop bits: 1 and Flow control: None.

Connection

RS-232 is connected through a 9-pin female D connector. Three pins will have specific functions
associated with them, some are unassigned.
atlona.com
5 4 3 2 1
9 8 7 6
A
No. Pin
1 ----
2 Tx
3 Rx
4 ----
5 Gnd
6 ----
7 ----
8 ----
9 ----
10
B
C
Function
Not used
Transmit
Receive
Not used
Ground
Not used
Not used
Not used
Not used
Toll free: 1-877-536-3976
Local: 1-408-962-0515