Front Panel Block, Power Led, Ir And Speaker Connector - FIC K7M-400A Instruction Manual

K7M-400A Mainboard Manual
Front Panel Block, Power LED, IR, and Speaker Connector
This block connector includes the connectors for linking with Power LED (3-
pin), HDD LED, power button, power/sleep/message waiting button, and the
reset button on the front panel of the system case. Please identify the polari-
ties of the plug wires for the case speaker and LEDs.
The plug wires (below) polarities
of these buttons will not affect
the function.
(1) Reset Switch is connected to the reset button. Push this switch to reboot
the system instead of turning the power button off and on.
(2) HDD LED is connected to the IDE device indicator. This LED will blink
when the hard disk drives are activated.
(3) Power (Single and Dual) /Sleep LED
Please refer to the tables below for the represen-
tations of LED states.
There is another 3-Pin Power LED connector on
board for some cases that have a 3-pin plug.
2 - 10