FIC K7M-400A Instruction Manual page 42

K7M-400A Mainboard Manual
DRAM Clock/Drive Control
Current FSB Frequency, Current DRAM Frequency
This item allows you to get current FSB and DRAM frequencies.
DRAM Clock
The feature allows users to select the DRAM clock.
The options are: 133 MHz, 166 MHz, 200 MHz, By SPD.
DRAM Timing
This feature allows user to select the way to set DRAM timing.
The options are: Manual, Auto By SPD, Turbo, Ultra.
DRAM CAS Latency
If the CAS latency of your installed memory medule is 2 Cycle, The selec-
tion 2 will enhance system performance. The options are: 1.5, 2, 2.5, 3.
Bank Interleave
This item allows users to select the bank interleave function of DRAM,
when the feature DRAM Timing By SPD set at Disabled.
The options are: Disabled, 2 Bank, 4 Bank.
Precharge to Active (Trp)
This item allows users to set the clock time from Precharge to Active com-
mand. The options are: 2T, 3T, 4T, 5T.
Active to Precharge (Tras)
This item allows users to set the clock time from Active to Precharge com-
mand. The options are: 6T, 7T, 8T, 9T.
Active to CMD (Trcd)
This item allows users to set the clock time from Active to Read/Write
Delay command. The options are: 2T, 3T, 4T, 5T.
DRAM Burst Length
This item allows users to set DRAM burst length.
The options are: 4, 8.
3 - 8