CW33/CW33+ Mainboard Manual
CAUTION:
Before connecting with the TV video cable to RGB_OUT connector,
make sure your system power is off. Failure to do so may cause
damage to the mainboard.
TV Video Port Connector: RGB_OUT
This 1x6-pin connector allows you to connect to your TV set vedio port for
using your TV as a monitor.
Front Panel Block Connector: F_PNL
This block connector concludes the connectors for linking with IDE LED,
power LED, remote power button, message LED, suspend button, reset but-
ton and speaker on the front panel of the system case. Please identify polari-
ties of plug wires for the case speaker and LEDs. Please ask vendor about this
information when you buy them and install the system by yourself. The plug
wires' polarities of this buttons will not affect the function.
2 - 20