Front Panel Block Connector - FIC AM39L Manual

AM39L Mainboard Manual
Front Panel Block
Connector
This block connector includes the
connectors for linking with Power
LED (3-pin), HDD LED, power
button, power/sleep button, reset
buttonon the front panel of the sys-
tem case. Please identify polarities of
plug wires for the case speaker and
LEDs. Please ask vendor about this
information when you buy them and
install the system by yourself.
NOTE: Users that want to use IR port must set related BIOS features.
(1) Reset Switch is connected to the reset button. Push this switch to reboot
the system instead of turning the power button off and on.
(2) HDD LED is connected to the IDE device indicator. This LED will blink
when the hard disk drives are activated.
(3) Power (Single and Dual) /Sleep LED
Please refer to the tables below for the representations of LED states.
There is another 3-Pin Power LED connector on board for some cases that with
a 3-pin plug.
2 - 12