Install Expansion Cards - FIC K7M-400A Instruction Manual

The plug from the power supply can only be inserted in one orientation
because of the different hole sizes. Find the proper orientation and push down
firmly making sure that the pins are aligned.

4). Install Expansion Cards

This section describes how to connect an expansion card to one of your
system expansion slots. Expansion cards are printed circuit boards that, when
connected to the mainboard, increase the capabilities of your system. For
example, expansion cards can provide video and sound capabilities. The
mainboard features one AGP and three PCI bus expansion slots.
CAUTION:
1. Make sure to unplug the power supply when adding or remov
ing expansion cards or other system components. Failure to
do so may cause severe damage to both the mainboard and
expansion cards.
2. Always observe static electricity precautions.
3. Please read Handling Precautions at the start of this manual.
1. Select an available expansion slot.
Installation Procedures
2 - 7